In Taiwan, a 6.4-magnitude earthquake occurred, and Nanke, which is adjacent to the epicenter, also had sporadic disasters. Taiwan’s wafer foundry manufacturers TSMC and UMC all had wafer fragments due to the earthquake, and the panel factory group created a five-factory engine room and even a small fire. It will be extinguished within a few hours, and many manufacturers are currently shutting down, and production will resume after the loss is checked.
The Industrial Bureau pointed out that there are two sporadic disasters in the industrial zone in the Central District, and there are no abnormalities in the industrial bureaus in the districts. The current returns in the non-industrial areas are mostly small losses in the factory or office. The loss amount is within 10 million, and some equipments that have been shut down due to power jump have been resumed into production and will not be affected. The companies are expected to be quickly cleared and resumed production.
Nanke Solar Optoelectronics manufacturers report that the construction and equipment are safe and safe, and some equipments that have been shut down due to power jump have been put into production and will not be affected. The companies are expected to be quickly cleaned up and resumed production. LED manufacturers have partially dropped the ceiling and the pipeline has been repaired urgently, which has not affected production.
The loss of wafer foundries and panel factories is relatively heavy. TSMC, UMC and panel makers are all due to strong earthquakes. The machine starts the protection mechanism to automatically shut down the machine. TSMC and UMC have broken the film. The loss situation is still being checked.
TSMC has one 12-inch and 8-inch fabs in Nanke. TSMC pointed out that the plant has not been damaged, and there is no shift in the plant. It is expected that more than 95% of the machines will be fully restored within two to three days. At present, Hsinchu and Taichung employees have been deployed to support the Tainan plant. Official estimates indicate that the impact of the earthquake on the first quarter shipments will not exceed 1%, and will resume the damaged wafers as soon as possible.
UMC's four fabs also started an automatic safety mechanism due to the earthquake. The wafers in production were affected. The whole plant also stopped working on the whole line. However, UMC said that the incident will not affect shipments.
The group machine also automatically shuts down the protection machine during the strong earthquake. At present, the Tainan plant and the Kaohsiung plant are also in a state of complete shutdown. The Wuchang Tainan plant has a small fire in the engine room at the time of the earthquake, but the fire is on the early morning of the 6th. 5:57 has been extinguished immediately, and the impact on the operation is still under evaluation.
AUO was concentrated in Zhongke, Zhuke and Taoyuan Longtan because of the factory area. The strong earthquake in the south was not greatly affected.
The Industrial Bureau pointed out that Tainan City is still in the water stoppage, including Tainan Science and Technology, Anping and Yongkang Industrial Zone. The full-scale water supply in Nanke Park has not been affected, and Yongkang and Anping Industrial Zone are due to the majority of manufacturers on the Spring Festival holiday. The impact of water storage standby is relatively small. Currently, the pipeline is being repaired, and the water and electricity supply in other areas is normal.
Introduction:
This Portable Pulse Oximeter is easy to use, measure blood oxygen saturation (SpO2) value and pulse rate accurately.
The Finger Pulse Oximeter is intended for noninvasive spot-check measurement of functional oxygen saturation of arterial hemoglobin (SpO2). Advanced DSP algorithm reduces the influence of motion artifact and improve measurement accuracy of low perfusion.
Features:
Highlights of this Medical Device Pulse Oximeter
1. This Blood Oxygen Monitor features dual color OLED display,can show the six different display mode in 4 directions
2. Handheld Pulse Oximeter machine is ONE BUTTON control
3. Low-power consumption, work with the 2 pieces AAA alkaline battery.
4. Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage
5. Pulse Oximeter Fingertip will automatically power off in 8 seconds if there is no finger signal.
7. Medical grade Pulse Oximeter has1-4 levels of brightness can be adjusted
8. This pulse oximeter reader has audible alarm function: with beep and alarm
9. Small in volume, light in weight, and convenient to carry, true portable pulse oximeter
10. The normal range is 95% to 100%. Hypoxemia is inferred when the oxygen saturation levels are 92% or below
Blood Oxygen Monitor,Pulse Oximeter Fingertip,Medical Device Pulse Oximeter,Pulse Oximeter Machine,Health Pulse Oximeter,Exercise Pulse Oximeter
Axiswell Technology Co., Ltd , https://www.medhealthycare.com