Imagine that when your car is flying on the highway, the intelligent navigation system helps you avoid traffic jams one after another, and you enjoy the morning coffee in your seat and watch it leisurely. News or check emails, no need to hold the steering wheel or pedal brakes at all times.
Imagine that the Advanced Driver Assistance System (ADAS) is currently undergoing amazing technological advances. One after another short-term development not only helps passengers improve driving safety, but also paves the way for the development of sensing, intelligence and control, making all the easy and enjoyable driving experience a reality.
The grades of the cars vary, and there are both standard compact cars and luxury full-size cars on the market. ADAS technology is of course equally high and low.
Common driver information systems include rearview cameras, panoramic field of view displays, blind spots, and lane departure warnings. These ADAS technologies provide information assistance to drivers who are always in control of car operation.
At the same time, some semi-automatic systems also provide the driver with auxiliary information while the vehicle is in motion. For example, lane keeping assist and active cruise control can automatically control the car in specific situations such as the car deviating from the lane, but the driver can always leave the system automatically according to the actual situation.
Unmanned vehicles are currently in the experimental phase and may take more than a decade to begin mass production. However, there are already high-automatic systems for high-end vehicles on the market. In these high-end cars, regardless of whether there is anyone in the driver's seat, the vehicle can be operated autonomously. These systems include automatic parking, driver monitoring and fatigue driving monitoring.
If our car can achieve both automatic parking and automatic lane keeping, and provide us with blind spots of information and warnings, why is the current fully automated vehicle not yet an industry standard? First, the electronic system in the unmanned vehicle currently in the experimental stage occupies most of the space of the car, and its technical cost is much higher than the cost of the vehicle itself. In the next 10 years, our main goal is to make these technical systems as small as possible, lighter in weight, and more affordable.
We believe that the best way to achieve these goals is to start at the subsystem and system levels simultaneously, minimizing design changes caused by new feature integration. As ADAS technology is undergoing rapid changes, this flexibility is a must to ensure that the latest technological advances can be applied to the next generation of models.
Ultimately, we must overcome the unique challenges of embedding technology into automotive applications. Even under certain extreme temperatures and harsh environmental conditions, our semiconductor devices must maintain high quality, high reliability and extremely high safety standards.
The above summarizes several methods for integrating ADAS into vehicles at present or in the near future. For more solutions, please refer to TI's latest ADAS white paper. The white paper also describes the legal and social barriers to overcoming the large-scale implementation of driverless vehicles, including more technical requirements related to the development of ADAS and how TI can provide solutions to these requirements.
Although the future of driverless cars may have to wait until the next decade, the development and advancement of technology is always in our eyes.
Introduction
SCOTECH manufactures a full range of pole mounted distribution transformers, they are mounted on electrical service pole at the level of overhead cables, normally oil immersed type and used in extensive rural area, they are compact in size and small in mass so that it is easy for installation, far away from the ground level makes it inaccessible, reducing the risk of injury to animals and people and minimize the vandalism.
Scope of supply
Primary voltage up to 35KV
Rated power: up to 500KVA
Installation: pole mounted
Standards
SCOTECH`s three phase distribution transformers are designed and manufactured in accordance with all major international standards (IEC, ANSI, UL, etc.)
Why SCOTECH
Long history- Focus on transformer manufacturing since 1934.
Technical support – 134 engineers stand by for you 24/7.
Manufacturing-advanced production and testing equipment, strict QA system.
Perfect service-The complete customer service package (from quotation to energization).
Pole Transformer,Pole Mounted Transformer,3 Phase Pole Mounted Transformer,Single Phase Pole Mounted Transformer
Jiangshan Scotech Electrical Co.,Ltd , https://www.scotech.com