Everyone said that Henan Mobile EC6108V97_HN version did not break the way, just my version of this box is also to be left alone to try to see if it can succeed.
Take a look at the box version information:
Henan Mobile’s specialization is different from common ones. A lot of netizens do not know how to start. How can you see the rainbow without death?
The online cracking method summarizes the basics:
1) The latest "Huawei Wyatt V9_V9U_V9E_V9A_V8 universal fool crack" - Henan Mobile EC6108V97_HN version does not have "more or advanced" option but no "Remote Connection Control" No X
2) CA version into the "equipment test" Telnet connection crack - Henan Mobile EC6108V97_HN version is simply not equipped test mode not X
3) The method of using the flying pigeons to spread the books in the market - There are no flying pigeons in the market.
4) Use Huawei mobile phone to install the software with your own control - try it only as a remote control can not install software not X
. . . . . . .
N) pub version of the U disk crack - break through the iron shoes no time to get all the effort, good luck is right. Excluding other methods can only use the pub version of the U disk to break the method actually became.
Use the ROOT tools and methods of the Great God http://bbs.shafa.com/thread-1286586-1-1.html, specific steps:
1) In order to be safe, first "restore factory settings" password is 10086
2) Disconnect all networks first. Then enter the recovery method to boot at the same time mad press the remote control on the shutdown button, pay attention not to hold it down. Select the second item to restore the backup system. This will revert to a lower version of the firmware, increasing the success rate of cracking. Shut down after entering the system.
3) Download the crack tool, unzip the file ROOT_EC6108V9U_UDISK_20160408.zip and copy the file inside the upgrade folder to the root directory of the U disk. Note that the U disk must be in FAT32 format. The USB flash drive is inserted near the USB port of the power switch.
4) Re-enter recovery. The first item is selected. It will be restarted soon after a while.
5) After the restart may not appear "sofa desktop", do not worry pressing the "home" button will appear "select the home screen application" choose "sofa desktop" choose "always" will then update the "sofa desktop" pop-up application installation options must Select "Application Package Installer" and do not select "Package Installer"
6) Update SU binary file I did not do this step, ROOT permission is normal.
Followed by the introduction of the post on the line. Regarding the screening system upgrade, Henan Mobile EC6108V97_HN version does not have "detect update" ROOT tool said it is already shielded, and for peace of mind I have changed the upgrade URL in the system settings.
"Dual network function" I did not test without demand.
"There is no trial if Henan Mobile is not in the menu button to exit the IPTV application patch."
"Remove annoying password input when entering settings" Henan Mobile EC6108V97_HN Edition Settings No password is not required.
"Change the true resolution of the box from 720P to 1080P" Henan Mobile EC6108V97_HN version has ro.sf.lcd_density=240 The implementation of the two orders can be changed, but looked uncomfortable to recover.
"Backup and replace factory firmware without equipment test mode" this method is also tried and tested, USB flash drive is close to the power switch that is sda1, but this is really not useful to me.
Put a security rabbit looked at the configuration:
Should be quad-core 1.5G CPU 1G 8G memory, gpu is Mali450MP, Android version 4.4.2
Unhappy is the display output only 720, 1080 two say good 4K? And I have another ZTE 4K box.
Installed common apps
The box can be used and the system response is basically OK. It is the interface of the advanced original IPTV when starting up, want to enter the sofa tabletop for a while. Occasionally, the sofa desktop will not be able to move the icon to select the application and restart it.
Cracking is not too difficult, messing up to restore the backup system to re-crack, I was tossing several times. However, if you want to retain the IPTV functionality, you should never do a wipe operation in recovery.
The tool version in the Great God Post is old with a new link: http://pan.baidu.com/s/1o7IFXQq Password: xnni
Take a look at the box version information:
Henan Mobile’s specialization is different from common ones. A lot of netizens do not know how to start. How can you see the rainbow without death?
The online cracking method summarizes the basics:
1) The latest "Huawei Wyatt V9_V9U_V9E_V9A_V8 universal fool crack" - Henan Mobile EC6108V97_HN version does not have "more or advanced" option but no "Remote Connection Control" No X
2) CA version into the "equipment test" Telnet connection crack - Henan Mobile EC6108V97_HN version is simply not equipped test mode not X
3) The method of using the flying pigeons to spread the books in the market - There are no flying pigeons in the market.
4) Use Huawei mobile phone to install the software with your own control - try it only as a remote control can not install software not X
. . . . . . .
N) pub version of the U disk crack - break through the iron shoes no time to get all the effort, good luck is right. Excluding other methods can only use the pub version of the U disk to break the method actually became.
Use the ROOT tools and methods of the Great God http://bbs.shafa.com/thread-1286586-1-1.html, specific steps:
1) In order to be safe, first "restore factory settings" password is 10086
2) Disconnect all networks first. Then enter the recovery method to boot at the same time mad press the remote control on the shutdown button, pay attention not to hold it down. Select the second item to restore the backup system. This will revert to a lower version of the firmware, increasing the success rate of cracking. Shut down after entering the system.
3) Download the crack tool, unzip the file ROOT_EC6108V9U_UDISK_20160408.zip and copy the file inside the upgrade folder to the root directory of the U disk. Note that the U disk must be in FAT32 format. The USB flash drive is inserted near the USB port of the power switch.
4) Re-enter recovery. The first item is selected. It will be restarted soon after a while.
5) After the restart may not appear "sofa desktop", do not worry pressing the "home" button will appear "select the home screen application" choose "sofa desktop" choose "always" will then update the "sofa desktop" pop-up application installation options must Select "Application Package Installer" and do not select "Package Installer"
6) Update SU binary file I did not do this step, ROOT permission is normal.
Followed by the introduction of the post on the line. Regarding the screening system upgrade, Henan Mobile EC6108V97_HN version does not have "detect update" ROOT tool said it is already shielded, and for peace of mind I have changed the upgrade URL in the system settings.
"Dual network function" I did not test without demand.
"There is no trial if Henan Mobile is not in the menu button to exit the IPTV application patch."
"Remove annoying password input when entering settings" Henan Mobile EC6108V97_HN Edition Settings No password is not required.
"Change the true resolution of the box from 720P to 1080P" Henan Mobile EC6108V97_HN version has ro.sf.lcd_density=240 The implementation of the two orders can be changed, but looked uncomfortable to recover.
"Backup and replace factory firmware without equipment test mode" this method is also tried and tested, USB flash drive is close to the power switch that is sda1, but this is really not useful to me.
Put a security rabbit looked at the configuration:
Should be quad-core 1.5G CPU 1G 8G memory, gpu is Mali450MP, Android version 4.4.2
Unhappy is the display output only 720, 1080 two say good 4K? And I have another ZTE 4K box.
Installed common apps
The box can be used and the system response is basically OK. It is the interface of the advanced original IPTV when starting up, want to enter the sofa tabletop for a while. Occasionally, the sofa desktop will not be able to move the icon to select the application and restart it.
Cracking is not too difficult, messing up to restore the backup system to re-crack, I was tossing several times. However, if you want to retain the IPTV functionality, you should never do a wipe operation in recovery.
The tool version in the Great God Post is old with a new link: http://pan.baidu.com/s/1o7IFXQq Password: xnni
KNM2 Series Moulded Case Circuit Breaker
KNM2 series Moulded Case Circuit Breaker is MCCB , How to select good Molded Case Circuit Breaker suppliers? Korlen electric is your first choice. All moulded Case Circuit Breakers pass the CE.CB.SEMKO.SIRIM etc. Certificates.
Moulded Case Circuit Breaker /MCCB can be used to distribute electric power and protect power equipment against overload and short-current, and can change the circuit and start motor infrequently. The application of Moulded Case Circuit Breaker /MCCB is industrial.
Korlen electric also provide Miniature Circuit Breaker /MCB. Residual Current Circuit Breaker /RCCB. RCBO. Led light and so on .
KNM2 series Molded Case Circuit Breaker,KNM2 series Small Size Molded Case Circuit Breaker,KNM2 series Electrical Molded Case Circuit Breaker,KNM2 series Automatic Molded Case Circuit Breaker
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.korlenelectric.com