Recently, Guangzhou Quality and Technical Supervision Bureau announced the results of the quality supervision and inspection of Guangzhou lighting source and lighting products in 2014. The results showed that many brands such as KEATOO, KD, Zhongguang, GTD, etc. were all unqualified.
More than three percent of product failure <br> <br> Guangzhou Quality and Technical Supervision announced the results show that this supervision in accordance with GB7000.10-1999 "fixed general purpose luminaires safety requirements", part GB7000.1-2007 "lamps 1 : General Requirements and Tests, GB 17743 "Limitations and Measurement Methods for Radio Disturbance Characteristics of Electrical Lighting and Similar Equipment", GB 17625.1-2003 "Electromagnetic Compatibility Limits Harmonic Current Emission Limits (Device Input Current per Phase ≤ 16A) Standards, etc., for structure (conduit), external wiring (power connection), external wiring (cross-sectional area), internal wiring (cross-sectional area), protection against electric shock, durability test, heat resistance, fire resistance and tracking resistance (Heat-resistant), heat-resistant, fire-resistant and electrical tracking (refractory), insertion loss (disturbance voltage, harmonic current) and other items are tested.
This time, a total of 38 batches of products produced by 35 companies were sampled. After inspection, 12 batches of products produced by 11 companies did not meet the standard requirements, and the failure rate was 31.6%.
10 batches of substandard product logo <br> <br> The spot checks, sign substandard products are 10 batches. Incomplete signs and no installation instructions may result in danger to the user during installation and use.
Among them, 2 batches of lamps did not indicate mandatory signs such as rated voltage, rated power and rated frequency; 3 batches of lamps did not indicate the specific conditions and restrictions that should be followed when the lamps were used; 1 batch of floodlights did not indicate the maximum projected area And installation height range; 1 batch of aquarium luminaires are not marked with IP protection level, because the aquarium luminaires are non-ordinary luminaires, the IP protection level must be marked on the luminaire.
There are 2 batches of products with unqualified structure. GB 7000.217-2008 specifies that the double insulated or reinforced insulation openings cannot pass directly to the live parts and the conical pins touch the live parts.
Guangzhou Quality and Technical Supervision Bureau reminds that when purchasing lighting source and lighting products, pay attention to packaging, printing should be clear, model, specification, factory name, and complete site. Try to buy brand-name products produced by well-known companies. The quality of these products is relatively good, and there are reliable maintenance services.
More than three percent of product failure <br> <br> Guangzhou Quality and Technical Supervision announced the results show that this supervision in accordance with GB7000.10-1999 "fixed general purpose luminaires safety requirements", part GB7000.1-2007 "lamps 1 : General Requirements and Tests, GB 17743 "Limitations and Measurement Methods for Radio Disturbance Characteristics of Electrical Lighting and Similar Equipment", GB 17625.1-2003 "Electromagnetic Compatibility Limits Harmonic Current Emission Limits (Device Input Current per Phase ≤ 16A) Standards, etc., for structure (conduit), external wiring (power connection), external wiring (cross-sectional area), internal wiring (cross-sectional area), protection against electric shock, durability test, heat resistance, fire resistance and tracking resistance (Heat-resistant), heat-resistant, fire-resistant and electrical tracking (refractory), insertion loss (disturbance voltage, harmonic current) and other items are tested.
This time, a total of 38 batches of products produced by 35 companies were sampled. After inspection, 12 batches of products produced by 11 companies did not meet the standard requirements, and the failure rate was 31.6%.
10 batches of substandard product logo <br> <br> The spot checks, sign substandard products are 10 batches. Incomplete signs and no installation instructions may result in danger to the user during installation and use.
Among them, 2 batches of lamps did not indicate mandatory signs such as rated voltage, rated power and rated frequency; 3 batches of lamps did not indicate the specific conditions and restrictions that should be followed when the lamps were used; 1 batch of floodlights did not indicate the maximum projected area And installation height range; 1 batch of aquarium luminaires are not marked with IP protection level, because the aquarium luminaires are non-ordinary luminaires, the IP protection level must be marked on the luminaire.
There are 2 batches of products with unqualified structure. GB 7000.217-2008 specifies that the double insulated or reinforced insulation openings cannot pass directly to the live parts and the conical pins touch the live parts.
Guangzhou Quality and Technical Supervision Bureau reminds that when purchasing lighting source and lighting products, pay attention to packaging, printing should be clear, model, specification, factory name, and complete site. Try to buy brand-name products produced by well-known companies. The quality of these products is relatively good, and there are reliable maintenance services.
Xinxiang Mina Import & Export Co., Ltd. , https://www.mina-motor.cn