Primers
I am just about to usher in the National Day. I have been busy working for half a year and I just carelessly worked. I just wanted to celebrate my birthday for the motherland. I suddenly remembered that Zhang Aunt had not written an article for months. So I sent it to me and I couldn’t wait to celebrate the motherland’s birthday. The time
The following is the text
Since I started working, I have gradually become fascinated with DIY. The reason is that I feel that notebooks that have been used for many years since the University can't run smoothly. Opening a word document will take half a minute. And after all, I don't have a desktop without a home. The Queen’s approval allowed her to install a machine at the end of the previous year. From then on, she stepped into this deep water.
When the goal of the fashion machine is very clear (accurately, it is very low):
1. I can light up normally (at the time I called it "can boot")
2. The main performance to meet the office and other office software (home research has a queen); occasional play for me and other milk powder and other stand-alone online games
3. Budget within 6,000 yuan (including monitor)
As a result, I installed the following thing...
In the present, some people will certainly say: “Do you give me this piece of stuff out of 6,000 pieces?†Put aside nothing else, at least when the Queen wrote a thesis and I used to use powdered milk, it was smooth... But since I was in Zhang After the aunt saw the words of a big God-worthy friend, I suddenly felt like I was in trouble:
"In this era of expensive land, you would be sorry if you made an ATX host..."
   For Nanjing's housing prices, I do not want to say anything. The four dragons in the housing (municipalities) are really not ridiculous. It is a bit of an issue. In short, re-engaging on a small host is my new goal. Learned from the experience of the first installation, this time basically did enough homework, instead of just checking whether the hardware is compatible and doing homework, gradually gained some experience in order to prevent part of the novice DIY Value-friends repeat their own mistakes, but also in order to leave a mark on the road to their own opportunities, there is this article (newbies do not shoot to the gods)
This film is mainly the problem of the first time I installed the machine, but it should also be part of the novice easy to enter the error:
1. Z series motherboards with non-K series CPU
In simple terms, Z series motherboards (such as Z97, Z170, etc.) are mainly used for overclocking; non-K series CPUs cannot be overclocked, so... (Single over FSB, don't go with the novice and say) because it is home, So I think the normal match should be: B series motherboard + non-K series CPU.
My Jingdong don’t know why it’s already off the shelf, so let’s put a box picture (in fact, because a certain treasure price is terrible)
The H series motherboards are a bit of a myth, but normally, the B series are more popular (B85, B150, etc.). I'm Gigabyte's Brain Residue Powder, and I'd like to start with this one:
This is similar to the B85N Phoenix that I use now, although I don't like light pollution, but the orange breathing light is really cool! Bring your own dual-band wireless card! Gigabyte faith must be recharged!
2. Large board upgrade space, large chassis cooling
For this reason, ATX board was chosen, and a large chassis was followed. In other words, when the Z97 motherboard bought in 1399, I didn't use the M.2 interface. (At that time, the SSD of the M.2 interface had not been popularized yet, and the price was high.) The slot distribution is as follows:
In fact, the ATX board out of those slots in fact normal households simply do not need, if not enthusiasts, who had nothing to organize a multi-channel graphics card, full memory slot ah ... and on the ITX motherboard, the dual channel + significant independence Sufficient to meet the needs of the vast majority of people. It may be said that the ITX motherboard alone is inconvenient, but I think that even with INTEL's nuclear display is normal enough, and now supports full-length graphics ITX chassis also a lot of oh.
When heat is dissipated, the power consumption of non-K-series CPUs is limited, and the power consumption of the same-performance CPUs is gradually declining. With a hundred-level heat dissipation, you can control the temperature quite steadily. For example, a civilian artifact that was once held up to the sky was anti-human 400
3. The budget focus is reserved for the three major components.
Because of the tight budget, the power supply and the chassis have shrunk (customized machine has shrunk). At that time, it has been thought that the three major parts are the highlights, and electro-mechanical and other things can be used cheaply, but now it is the opposite. As mentioned earlier, ATX big-board upgrade space, and with the release of 6-generation CPU, but let me recognize the reality: I can not use the 6-generation CPU Z97, but also can not use DDR4 chassis, is the following ...... A bit to kill the wind
The huge chassis has hard drives that I have counted for more...
Because the agribusiness did not give power, the toothpaste factory only worked to reduce power consumption during the past few years. Folks have also been circulated the slogan of “five years of warfare†but the high-frequency memory brought by the new platform, U. The 2 and M.2 interfaces do not exist on the old platform. Although I haven't encountered it yet, I often see other people's power like BOOM. So, what I really can use for a long time is the chassis and power that I initially despised.
The above is the painful experience of my first installation. If you have any mistakes, please also criticize and correct me. I will continue to record my next course of mind. We will see you next time.